Coltene Temposil 2 White Intro Kit

Description

Features  –

• Secure adhesion of provisional restorations to natural tooth structure, core build up material and metal alloys as well as zirconia
• Simple application as well as easy removal
• Fast setting time
• Two shades for esthetic applications
• Increases mechanical retention onto Zirconia & Metal crowns and on dentin too

Describtion –

TempoSIL 2 is a unique addition-cured silicone based zinc oxide temporary cement with a silane agent for optimal adhesion and superior marginal integrity. This formula produces a firm, yet elastic temporary cement that can be easily peeled off the tissue and out of the restoration. Clean ups are effortless! The convenient automix syringe with Oral Tip applicator provides a fast, instrument free application. The ideally balanced modulus of elasticity of the TempoSIL 2 formulation ensures for trouble-free removal of excess temporary cement. For esthetic applications, TempoSIL 2 is available in 2 different shades: white and dentin.

• Secure adhesion of provisional restorations to natural tooth structure, core build up material and metal alloys as well as zirconia
• Simple application as well as easy removal
• Fast setting time
• Two shades for esthetic applications
• Superior marginal integrity

Indications :

• Temporary cementation of provisional restorations
• Temporary cementation of provisional restorations on implant abutments
• Temporary cementation of final crowns and bridges
• Temporary cementation of final crowns and bridges on implant abutments

Key specification –

Working Time: ≤0:50 min
Setting Time: ≥2:00 min

Composition :

• Zinc oxide
• Polydimethylsiloxane

Pacaging –

• 2 x Smartmix syringe (11gm)
• 15 x Mixing tips

Direction to use –

1. Gently dry the prepared tooth surface by using oil-free compressed air. Do not overdry. The best results will be achieved, when the prepared tooth surface looks moist (shiny)
2. Cleanse and dry the inside of the restoration
3. Remove the syringe plug on the syringe and discard
4. Extrude a small amount of material directly out of the syringe onto a paper towel/tissue until it is evident that base and catalyst are being ejected. This ensures proper mixing
5. Immediately wipe the syringe orifice to remove excess material
6. Attach the Mixing Tip to the syringe by aligning the prongs inside the Mixing Tip with the syringe orifice. Seat onto the syringe and twist clockwise (90°) to lock in place
7. Apply TempoSIL 2 directly from the syringe into the provisional. Seat the provisional, applying slight pressure. Secure undisturbed for 30 - 60 s
8. After setting, remove the excess material (e.g. scaler)
9. After syringe use, disinfect used Mixing Tip and store the syringe with the used Mixing Tip attached.

Warranty –

• Warranty is not applicable for this product.